Teltonika FMB120 GPS tracker has an internal high gain GNSS antenna. With dual SIM (1x micro SIM and 1x eSIM), an internal battery, GLONASS and a Bluetooth OBD2 adapter. The FMB120 can perform additional tasks, such as monitoring whether the engine is running, checking whether the cabin door is open or closed, etc. It transfers the coordinates of the tracker and any other data to the server via the GSM network.
This tracker is ideal for:
fleet management
car rental companies
taxi companies
public transport
logistic companies
passenger cars etc.
With an additional Teltonika Vehicle CAN adapter you can read CAN data from both light and heavy vehicles. The FMB120 can be used in combination with the ALLCAN-300 (all vehicles) or the LV-CAN200 (light vehicles).
If you want to read the CAN data contactlessly, in addition to the FMB120 GPS tracker and the CAN adapter of your choice, you also need the Simple CAN contactless reader.
The FMB120 GPS tracker supports the 1-Wire protocol. This means that you can allow up to 500 different people to use the vehicle and that you can connect temperature sensors. You can prevent unauthorized access to your fleet via iButton or RFID ID and you can monitor your cargo with temperature sensors.
This tracker supports Bluetooth and is also a Bluetooth OBD2 adapter, which has the following advantages:
You can use it to read vehicle data (On Board Diagnostics) and sensor values wirelessly. You can also clear malfunctions in the OBD2.
The tracker can be configured with Bluetooth; with a single push the device is connected to the configurator.
You can call your drivers via Bluetooth, they can accept calls via a headset. A telephone is not necessary, so the employee can keep his hands free.
The internal battery keeps your tracker online and data continues to be sent when the vehicle engine is off.
Specifications Teltonika FMB120 GPS tracker:
GSM
Quad band 900/1800 MHz; 850/1900 MHz
GPRS Multi-Slot Class 12 (maximum 240 kbps)
GPRS Mobile Station Class B
SMS (text/data)
dual SIM (1x micro SIM and 1x eSIM)
GNSS
Tracking: 33/99 acquisition channels
-165 dBM sensitivity
Hot start < 1 s
Warm start < 25 s
Cold start < 35 s
NMEA-183 protocol
GPS, GLONASS, GALILEO, BEIDOU, SBAS, QZSS, DGPS, AGPS
Accuracy < 3 m
INTERFACE
2 digital inputs (1 reserved for ignition status monitoring)
1 analog input (10V or 30V range)
1 configurable input DIN3 or AIN2
2 digital open-collector outputs (connecting external relays, LED, buzzers, etc.)
1-Wire interface protocol (iButton, RFID, temperature sensors)
Micro SD card slot
Motion sensor
Power supply (+10...+30) V DC
Internal LiPo backup battery 170 mAh
Internal high gain GSM antenna
External GNSS antenna (SMA connection)
Dimensions: 65 x 56.6 x 18.9 mm
2 status LEDs
Micro USB port
BLUETOOTH
Bluetooth V4.0
Bluetooth transceiver fully compatible with Bluetooth V4.0 for external peripherals:
Voice calls via Bluetooth
Configuration via Bluetooth
OBD2 Bluetooth adapter/ OBD2 Bluetooth interface/ OBD2 Bluetooth dongle
